var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Nonlinear Backstepping Control of Permanent Magnet Synchronous Motor with Rotor Speed and Position Estimation';
document.write(linkifyHtml(str, options));
]]>
Permanent magnet synchronous motor (PMSM)]]>
nonlinear backstepping control]]>
sensorless control]]>
Extended Kalman filter(EKF)]]>
Matlab-Simulink]]>
This paper presents a nonlinear backstepping control strategy used to ensure good dynamic behavior, high performance and the stability of the permanent magnet synchronous motor (PMSM). However, this control requires the precise knowledge of certain variables (speed, torque and position) that are difficult to access or sensors require additional mounting space, reduce reliability, increase the cost of the engine, and make maintenance difficult. Thus, an Extended Kalman Filter (EKF) approach is proposed for the estimation of speed and rotor position in the PMSM. The interesting simulation results obtained which are subjected to the load perturbation show very well the efficiency and the good performance of the nonlinear feedback control proposed and simulated in Matlab-Simulink.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'KIRAD, Abderrahmen';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Grouni, Said';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'MECHALI, Omar';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 3 (2018); 133-142]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i3]]>
Laboratory of Signals and Systems, Algeria]]>
2018-09-15]]>
Copyright (c) 2018 Abderrahmen KIRAD, Said Grouni, Omar MECHALI]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/69/55]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/69]]>
10.51485/ajss.v3i3.69]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Combining MUSIC Spatial Sampling and Bootstrap to Estimate Closed Space DOA for Few Samples';
document.write(linkifyHtml(str, options));
]]>
DOA]]>
Array processing]]>
spatial sampling]]>
MUSIC method]]>
Bootstrap technique]]>
DOA estimation in array processing uses MUSIC (Multiple Signal Classification) algorithm, mainly. It’s the most investigated technique and is very attractive because of its simplicity. However, it meets drawbacks and fails when only very few samples are available and the sources are very close or highly correlated. In these conditions, the problem is more intricate and the detection of targets becomes arduous. To overcome these problems, a new algorithm is developed in this paper. We combine bootstrap technique to increase sample size, spatial sampling and MUSIC method to improve resolution. Through different simulations, the performance and the effectiveness of the proposed approach, referred as spatial Sampling and Bootstrapped technique ‘’SSBoot’’, are demonstrated.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'HADJ IRID, SIDI MOHAMMED';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'KAMECHE, SAMIR';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 3 (2018); 125-132]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i3]]>
Laboratory of Signals and Systems, Algeria]]>
2018-09-15]]>
Copyright (c) 2018 SIDI MOHAMMED HADJ IRID, SAMIR KAMECHE]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/68/54]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/68]]>
10.51485/ajss.v3i3.68]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Emulation of metamaterial waveguides';
document.write(linkifyHtml(str, options));
]]>
Metamaterial]]>
Waveguides]]>
Refractive index,]]>
Dispersion diagram]]>
Metamaterial waveguides]]>
In this work, we are interested by emulating metamaterial microwave waveguides which behave like conventional metallic ones. We use metamaterial layers based on two types of unit cells. The first one is a connected cross type unit cell which leads to a metamaterial with a near zero refraction index (n1≈ 0). The second one is a disconnected cross type unit cell which leads to a metamaterial with a refraction index greater than unity (n2 >1). With these two type of metamaterials we can define, in the metamaterial layer, different sections each one can have a refraction index equal to n1 or n2. Using these metamaterial layers we can build a metamaterial waveguide. This latter is obtained by stacking a number of layers. The waveguide is obtained by selecting an inner section with a refraction index n2 and an outer section with a refraction index n1 close to zero which plays a similar role as a metallic reflector to form the waveguide.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'BOURAS, Khedidja';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'LABIAD, Abdelhadi';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'SALEH, Chaker';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'BOUZOUAD, Mouloud';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 3 (2018); 117-124]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i3]]>
Laboratory of Signals and Systems, Algeria]]>
2018-09-15]]>
Copyright (c) 2018 Khedidja BOURAS, Abdelhadi LABIAD, Chaker SALEH, Mouloud BOUZOUAD]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/67/53]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/67]]>
10.51485/ajss.v3i3.67]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Broken Rotor Bars Fault Detection Based on Envelope Analysis Spectrum and Neural Network in Induction Motors';
document.write(linkifyHtml(str, options));
]]>
Induction motors]]>
Broken rotor bars]]>
Faults detection]]>
Envelope analysis]]>
Neural networks]]>
In this paper, a study has presented the performance of a neural networks technique to detect the broken rotor bars (BRBs) fault in induction motors (IMs). In this context, the fast Fourier transform (FFT) applied on Hilbert modulus obtained via the stator current signal has been used as a diagnostic signal to replace the FFT classic, the characteristics frequency are selected from the Hilbert modulus spectrum, in addition, the different load conditions are used as three inputs data for the neural networks. The efficiency of the proposed method is verified by simulation in MATLAB environment.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'BENSAOUCHA, Saddam';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'BESSEDIK, Sid Ahmed';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'AMEUR, Aissa';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'SEGHIOUR, Abdellatif';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 3 (2018); 106-116]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i3]]>
Laboratory of Signals and Systems, Algeria]]>
2018-09-15]]>
Copyright (c) 2018 Saddam BENSAOUCHA, Sid Ahmed BESSEDIK, Aissa AMEUR, Abdellatif SEGHIOUR]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/66/52]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/66]]>
10.51485/ajss.v3i3.66]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Three-phase Three-level Inverter Grid-tied PV System with Fuzzy Logic Control based MPPT';
document.write(linkifyHtml(str, options));
]]>
Fuzzy logic MPPT controller]]>
Three-level T-type inverter]]>
photovoltaic generator]]>
grid connection]]>
power quality]]>
This paper presents a three phase single stage grid connected photovoltaic PV system. Maximum power transfer from the solar array to grid is ensured by using fuzzy logic (FL) based maximum power point tracking (MPPT) controller. The proposed MPPT technique provides fast and high performances under variable climate conditions as well as sudden variation of irradiance level. Change of measured photovoltaic power and its rate of change are the input variables of the proposed fuzzy logic controller while the change in reference current is defined as the output variable. In order to meet the power quality required by the international standards, a Space Vector Modulation (SVM) controlled three-level T-type inverter and a series LCL filter are used. To show the effectiveness of the proposed grid-connected system, Matlab/Simulink software is used to carry out the simulation part. Obtained results show the role of each component, particularly the response of the maximum power tracking, the quality of the injected power, the unity power factor operation and the system’s efficiency.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'AYACHI AMOR, Yacine';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'HAMOUDI, Frid';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'KHELDOUN, Aissa';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 3 (2018); 96-105]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i3]]>
Laboratory of Signals and Systems, Algeria]]>
2018-09-15]]>
Copyright (c) 2018 Yacine AYACHI AMOR, Frid HAMOUDI, Aissa KHELDOUN]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/65/51]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/65]]>
10.51485/ajss.v3i3.65]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Humanoid Robot, What is missing?';
document.write(linkifyHtml(str, options));
]]>
Humanoid robot specifications]]>
different robot platforms]]>
graphic robot design]]>
humanoid robot limitations]]>
A humanoid robot is now a reality, which has been very developed. It can do almost all tasks that either the human can do or not as well as the dangerous tasks. The researchers recently develop robots, which can see, smell, smile, speak, touch, walk and talk using the more advanced technological tools such as computer aided design. However, these humanoid robots cannot react as human, so what is missing?, what is about the spirit? Does robot have the spirit? This paper answers these questions and presents imperfection of humanoid robot.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'BELAIDI, Hadjira';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'BENTARZI, Hamid';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 2 (2018); 89-95]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i2]]>
Laboratory of Signals and Systems, Algeria]]>
2018-06-01]]>
Copyright (c) 2018 Hadjira BELAIDI, Hamid BENTARZI]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/63/50]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/63]]>
10.51485/ajss.v3i2.63]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'High Precision Roll/Yaw Attitude Stabilization for Flexible communication satellite';
document.write(linkifyHtml(str, options));
]]>
Flexible spacecraft]]>
Attitude stabilization]]>
Extended state observer]]>
Proportional Derivative]]>
The aim of this paper is to realize high-precision attitude stabilization for roll/yaw axes of flexible communication satellite while attenuate the effects of the elastic vibrations and multiple disturbances such as solar radiation and model uncertainties. a composite control has been designed which is comprise two part an anti-disturbance proportional-derivative (PD) controller is designed to stabilize the attitude while rejecting the effects of flexible vibrations, environmental disturbances, and unmodelled dynamics, whose are assumed as an extended state. This controller comprises two parts, i.e. an extended state observer and a PD controller with feedforward. First, flexible vibrations, environmental disturbances and unmodelled dynamics are regarded as an extended state, which can be estimated by the proposed observer. The estimated extended state can be compensated by feedforward where the attitude can be stabilized by the PD controller. Numerical simulation results are presented to demonstrate the effectiveness of the control scheme.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Benmansour, J. E';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Khouane, B.';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Rima, R.';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 2 (2018); 81-88]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i2]]>
Laboratory of Signals and Systems, Algeria]]>
2018-06-15]]>
Copyright (c) 2018 J. E Benmansour, B. Khouane, R. Rima]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/62/49]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/62]]>
10.51485/ajss.v3i2.62]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Analysing Primary Signal Sensing Test in Cognitive Radio Networks Using an Alpha-Beta Filter and a Neyman-Pearson Detector';
document.write(linkifyHtml(str, options));
]]>
Alpha-Beta Filter]]>
Neyman–Pearson Detector]]>
Kalman filter]]>
Energy Detector]]>
The signal strength sensing in the context of cognitive radio networks (CRNs), is very important to predict the primary signal of base station (PBS), particularly when the secondary user (SU) is in a congested environment, and also when is in motion towards the end of coverage of PBS. However, this article presents an analysis on the prediction of primary signal strength in CRNs using an Alpha-Beta Filter (ABF) and a Neyman-Pearson Detector (NPD). The challenge of this contribution is based on a realistic sensing of primary signal strength and to do that, we have assumed that the reporting channels between the SU and the PBS are composited with the shadowing and multipath fading (SMF), and the receiver noise has also added. In this regard, the obtained results were discussed through: the signal-to-noise ratio (SNR) uncertainty, the detection probability (PD) and the False Alarm Probability (PFA), where the average relative error of prediction for the PD will be equal to10-5.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Adardour, Haroun Errachid';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Kameche, Samir';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 2 (2018); 70-80]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i2]]>
Laboratory of Signals and Systems, Algeria]]>
2018-06-15]]>
Copyright (c) 2018 Haroun Errachid Adardour, Samir Kameche]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/61/48]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/61]]>
10.51485/ajss.v3i2.61]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Impact of NBTI Stress on VDMOSFET Regions';
document.write(linkifyHtml(str, options));
]]>
VDMOSFET regions]]>
C-V]]>
NBTI]]>
In this paper, we investigate the impact of negative bias temperature instability (NBTI) degradation on both channel and drain regions, of commercial power double diffused MOS transistor (VDMOSFET), using capacitance-voltage method (C-V). We report that the degradation is important at channel (drain) region in p-channel VDMOSFET (n-channel VDMOSFET). That means that the phosphorus doped region (n-type) is more sensitive to NBTI stress.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Merah, Sidi Mohammed';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Nadji, Bouchra';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 2 (2018); 65-69]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i2]]>
Laboratory of Signals and Systems, Algeria]]>
2018-06-15]]>
Copyright (c) 2018 Sidi Mohammed Merah, Bouchra Nadji]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/60/47]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/60]]>
10.51485/ajss.v3i2.60]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'Sensorless Speed and Reactive Power Control of a Double-Feed Induction Generator using Adaptive Observer in Wind Turbine Power Plant';
document.write(linkifyHtml(str, options));
]]>
Sensorless]]>
Vector Control]]>
Wind Turbine]]>
Doubly Fed Induction Generator]]>
Adaptive Observer]]>
This work presents a new method for the synthesis of a sensorless speed and reactive power control applied to a wind turbine system based to a Doubly Fed Induction Generator (DFIG). The proposed method based on adaptive observers: The rotor speed is adapted using adaptation mechanisms. Stability analysis based on Lyapunov theory is used to guarantee the stability of the observer. To verify the consistency of the proposed approach. We will be interested in the study of vector control based on the synthesis of classical controllers. Simulation results provided with the MATLAB/SIMULINK environment show the consistency of the proposed approaches.]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'BOUMALHA, NOUREDDINE';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'KOUCHIH, DJILLALI';
document.write(linkifyHtml(str, options));
]]>
var options = {
attributes: {
rel: 'nofollow',
title: 'click to open',
},
className: '',
format: {
url: function (value) {
return value
}
},
ignoreTags: ['a'],
validate: {
url: function (value) {
return value;
}
}
};
var str = 'BOUCHERIT, MOHAMED SEGHIR';
document.write(linkifyHtml(str, options));
]]>
Algerian Journal of Signals and Systems ; Vol. 3 No. 2 (2018); 54-64]]>
2676-1548]]>
2543-3792]]>
10.51485/ajss.v3i2]]>
Laboratory of Signals and Systems, Algeria]]>
2018-06-15]]>
Copyright (c) 2018 NOUREDDINE BOUMALHA, DJILLALI KOUCHIH, MOHAMED SEGHIR BOUCHERIT]]>
https://creativecommons.org/licenses/by-nc/4.0]]>
https://ajss.dz/index.php/ajss/article/view/59/46]]>
application/pdf]]>
eng]]>
info:eu-repo/semantics/article]]>
info:eu-repo/semantics/publishedVersion]]>
Peer-reviewed Article]]>
https://ajss.dz/index.php/ajss/article/view/59]]>
10.51485/ajss.v3i2.59]]>